DemoCutting intraction function

From BanghamLab
Revision as of 10:06, 16 November 2012 by AndrewBangham (talk | contribs)
Jump to navigation Jump to search

Return to tutorials on GFtbox

Interaction function illustrating operations on the mesh

Run the project for 50 steps then single step to see the effects of:

  1. dissection (cutting)
  2. exploding (separating the parts)
  3. flattening



Note

  1. most of the comments (green stuff) has been removed from the interaction function itself (although the starting conditions, shown at the bottom, are preserved as part of the detailed description of the model)
  2. these three operations change the mesh and have to be placed at the end of the interaction function.

function m = gpt_democutting_20121114( m )
%m = gpt_democutting_20121114( m )
%   Morphogen interaction function.
%   Written at 2012-11-16 09:30:03.
%   GFtbox revision 4351, .

% The user may edit any part of this function between delimiters
% of the form "USER CODE..." and "END OF USER CODE...".  The
% delimiters themselves must not be moved, edited, deleted, or added.

    if isempty(m), return; end

    fprintf( 1, '%s found in %s\n', mfilename(), which(mfilename()) );

    try
        m = local_setproperties( m );
    catch
    end

    realtime = m.globalDynamicProps.currenttime;


%%% USER CODE: INITIALISATION

%%% END OF USER CODE: INITIALISATION


%%% SECTION 1: ACCESSING MORPHOGENS AND TIME.
%%% AUTOMATICALLY GENERATED CODE: DO NOT EDIT.

    if isempty(m), return; end

    setGlobals();
    global gNEW_KA_PAR gNEW_KA_PER gNEW_KB_PAR gNEW_KB_PER
    global gNEW_K_NOR gNEW_POLARISER gNEW_STRAINRET gNEW_ARREST
    dt = m.globalProps.timestep;
    polariser_i = gNEW_POLARISER;
    P = m.morphogens(:,polariser_i);
    [kapar_i,kapar_p,kapar_a,kapar_l] = getMgenLevels( m, 'KAPAR' );
    [kaper_i,kaper_p,kaper_a,kaper_l] = getMgenLevels( m, 'KAPER' );
    [kbpar_i,kbpar_p,kbpar_a,kbpar_l] = getMgenLevels( m, 'KBPAR' );
    [kbper_i,kbper_p,kbper_a,kbper_l] = getMgenLevels( m, 'KBPER' );
    [knor_i,knor_p,knor_a,knor_l] = getMgenLevels( m, 'KNOR' );
    [strainret_i,strainret_p,strainret_a,strainret_l] = getMgenLevels( m, 'STRAINRET' );
    [arrest_i,arrest_p,arrest_a,arrest_l] = getMgenLevels( m, 'ARREST' );
    [id_mid_i,id_mid_p,id_mid_a,id_mid_l] = getMgenLevels( m, 'ID_MID' );
    [id_rim_i,id_rim_p,id_rim_a,id_rim_l] = getMgenLevels( m, 'ID_RIM' );

% Mesh type: rectangle
%            base: 0
%          centre: 0
%      randomness: 0.1
%         version: 1
%           xdivs: 4
%          xwidth: 2
%           ydivs: 4
%          ywidth: 2

%            Morphogen    Diffusion   Decay   Dilution   Mutant
%            --------------------------------------------------
%                KAPAR         ----    ----       ----     ----
%                KAPER         ----    ----       ----     ----
%                KBPAR         ----    ----       ----     ----
%                KBPER         ----    ----       ----     ----
%                 KNOR         ----    ----       ----     ----
%            POLARISER         ----    ----       ----     ----
%            STRAINRET         ----    ----       ----     ----
%               ARREST         ----    ----       ----     ----
%               ID_MID         ----    ----       ----     ----
%               ID_RIM         ----    ----       ----     ----


%%% USER CODE: MORPHOGEN INTERACTIONS

    if (Steps(m)==0) && m.globalDynamicProps.doinit  % Initialisation code.
        % increase growth around the edge of the canvas to force it to buckle
        m = leaf_mgen_edge( m, 'id_rim',1);
        [id_rim_i,id_rim_p,id_rim_a,id_rim_l] = getMgenLevels( m, 'ID_RIM' );
        % assign a morphogen down the middle of the y axis
        id_mid_p((m.nodes(:,2)<0.2)&(m.nodes(:,2)>-0.2))=1;
        
        % To cut the mesh, set a temporary morphogen to 1 in places to cut
        seams=zeros(size(P));
        seams(id_mid_p>0.5)=1;
        m=leaf_set_seams(m,seams);
    end
    STOP_GROWING_TIME=50;
    if realtime<STOP_GROWING_TIME % Grow
        kapar_p(id_rim_p==0)=5;
        kbpar_p(id_rim_p==0)=0.5;
        kaper_p(id_rim_p==0)=5;
        kbper_p(id_rim_p==0)=0.5;
        knor_p =0;
    elseif realtime>=STOP_GROWING_TIME && realtime<STOP_GROWING_TIME+dt % dissect, explode and flatten 
        kapar_p=0;
        kbpar_p=0;
        kaper_p=0;
        kbper_p=0;
        knor_p =0;
    end

%%% END OF USER CODE: MORPHOGEN INTERACTIONS

%%% SECTION 3: INSTALLING MODIFIED VALUES BACK INTO MESH STRUCTURE
%%% AUTOMATICALLY GENERATED CODE: DO NOT EDIT.
    m.morphogens(:,polariser_i) = P;
    m.morphogens(:,kapar_i) = kapar_p;
    m.morphogens(:,kaper_i) = kaper_p;
    m.morphogens(:,kbpar_i) = kbpar_p;
    m.morphogens(:,kbper_i) = kbper_p;
    m.morphogens(:,knor_i) = knor_p;
    m.morphogens(:,strainret_i) = strainret_p;
    m.morphogens(:,arrest_i) = arrest_p;
    m.morphogens(:,id_mid_i) = id_mid_p;
    m.morphogens(:,id_rim_i) = id_rim_p;

%%% USER CODE: FINALISATION
% Cut the mesh along the seams (see above)
    % In this case once dissected and exploded (see GUI) the parts are flattened
    % Here the three processes are done in successive step to make them visible
    if realtime>=STOP_GROWING_TIME && realtime<STOP_GROWING_TIME+dt
        m=leaf_dissect(m);
       m = leaf_setproperty( m, 'freezing', 0.999 );
    elseif realtime>=STOP_GROWING_TIME+1  && realtime<STOP_GROWING_TIME+1+dt 
        m=leaf_explode(m,0.2);
    elseif realtime>=STOP_GROWING_TIME+2 && realtime<STOP_GROWING_TIME+2+dt 
        m=leaf_flatten(m);
    end
%%% END OF USER CODE: FINALISATION

end


%%% USER CODE: SUBFUNCTIONS


function m = local_setproperties( m )
% This function is called at time zero in the INITIALISATION section of the
% interaction function.  It provides commands to set each of the properties
% that are contained in m.globalProps.  Uncomment whichever ones you would
% like to set yourself, and put in whatever value you want.
%
% Some of these properties are for internal use only and should never be
% set by the user.  At some point these will be moved into a different
% component of m, but for the present, just don't change anything unless
% you know what it is you're changing.

%    m = leaf_setproperty( m, 'trinodesvalid', true );
%    m = leaf_setproperty( m, 'prismnodesvalid', true );
%    m = leaf_setproperty( m, 'thicknessRelative', 0.200000 );
%    m = leaf_setproperty( m, 'thicknessArea', 0.000000 );
%    m = leaf_setproperty( m, 'thicknessMode', 'physical' );
%    m = leaf_setproperty( m, 'activeGrowth', 1.000000 );
%    m = leaf_setproperty( m, 'displayedGrowth', 10 );
%    m = leaf_setproperty( m, 'displayedMulti', [] );
%    m = leaf_setproperty( m, 'allowNegativeGrowth', true );
%    m = leaf_setproperty( m, 'usePrevDispAsEstimate', true );
%    m = leaf_setproperty( m, 'perturbInitGrowthEstimate', 0.000010 );
%    m = leaf_setproperty( m, 'perturbRelGrowthEstimate', 0.010000 );
%    m = leaf_setproperty( m, 'perturbDiffusionEstimate', 0.000100 );
%    m = leaf_setproperty( m, 'resetRand', false );
%    m = leaf_setproperty( m, 'mingradient', 0.000000 );
%    m = leaf_setproperty( m, 'relativepolgrad', false );
%    m = leaf_setproperty( m, 'usefrozengradient', true );
%    m = leaf_setproperty( m, 'userpolarisation', false );
%    m = leaf_setproperty( m, 'thresholdsq', 1.000000 );
%    m = leaf_setproperty( m, 'splitmargin', 1.400000 );
%    m = leaf_setproperty( m, 'splitmorphogen',  );
%    m = leaf_setproperty( m, 'thresholdmgen', 0.500000 );
%    m = leaf_setproperty( m, 'bulkmodulus', 1.000000 );
%    m = leaf_setproperty( m, 'unitbulkmodulus', true );
%    m = leaf_setproperty( m, 'poissonsRatio', 0.300000 );
%    m = leaf_setproperty( m, 'starttime', 0.000000 );
%    m = leaf_setproperty( m, 'timestep', 1.000000 );
%    m = leaf_setproperty( m, 'timeunitname',  );
%    m = leaf_setproperty( m, 'distunitname', 'mm' );
%    m = leaf_setproperty( m, 'scalebarvalue', 0.000000 );
%    m = leaf_setproperty( m, 'validateMesh', true );
%    m = leaf_setproperty( m, 'rectifyverticals', false );
%    m = leaf_setproperty( m, 'allowSplitLongFEM', true );
%    m = leaf_setproperty( m, 'longSplitThresholdPower', 0.000000 );
%    m = leaf_setproperty( m, 'allowSplitBentFEM', false );
%    m = leaf_setproperty( m, 'allowSplitBio', true );
%    m = leaf_setproperty( m, 'allowFlipEdges', false );
%    m = leaf_setproperty( m, 'allowElideEdges', true );
%    m = leaf_setproperty( m, 'mincellangle', 0.200000 );
%    m = leaf_setproperty( m, 'alwaysFlat', 0.000000 );
%    m = leaf_setproperty( m, 'flattenforceconvex', true );
%    m = leaf_setproperty( m, 'flatten', false );
%    m = leaf_setproperty( m, 'flattenratio', 1.000000 );
%    m = leaf_setproperty( m, 'useGrowthTensors', false );
%    m = leaf_setproperty( m, 'plasticGrowth', false );
%    m = leaf_setproperty( m, 'totalinternalrotation', 0.000000 );
%    m = leaf_setproperty( m, 'stepinternalrotation', 2.000000 );
%    m = leaf_setproperty( m, 'showinternalrotation', false );
%    m = leaf_setproperty( m, 'performinternalrotation', false );
%    m = leaf_setproperty( m, 'internallyrotated', false );
%    m = leaf_setproperty( m, 'maxFEcells', 0 );
%    m = leaf_setproperty( m, 'inittotalcells', 0 );
%    m = leaf_setproperty( m, 'bioApresplitproc',  );
%    m = leaf_setproperty( m, 'bioApostsplitproc',  );
%    m = leaf_setproperty( m, 'maxBioAcells', 0 );
%    m = leaf_setproperty( m, 'colors', (6 values) );
%    m = leaf_setproperty( m, 'colorvariation', 0.050000 );
%    m = leaf_setproperty( m, 'colorparams', (12 values) );
%    m = leaf_setproperty( m, 'biocolormode', 'auto' );
%    m = leaf_setproperty( m, 'freezing', 0.999000 );
%    m = leaf_setproperty( m, 'canceldrift', false );
%    m = leaf_setproperty( m, 'mgen_interaction', (unknown type function_handle) );
%    m = leaf_setproperty( m, 'mgen_interactionName', 'gpt_demosubdivision_20121114' );
%    m = leaf_setproperty( m, 'allowInteraction', true );
%    m = leaf_setproperty( m, 'interactionValid', true );
%    m = leaf_setproperty( m, 'gaussInfo', (unknown type struct) );
%    m = leaf_setproperty( m, 'stitchDFs', [] );
%    m = leaf_setproperty( m, 'D', (36 values) );
%    m = leaf_setproperty( m, 'C', (36 values) );
%    m = leaf_setproperty( m, 'G', (6 values) );
%    m = leaf_setproperty( m, 'solver', 'cgs' );
%    m = leaf_setproperty( m, 'solverprecision', 'double' );
%    m = leaf_setproperty( m, 'solvertolerance', 0.001000 );
%    m = leaf_setproperty( m, 'solvertolerancemethod', 'max' );
%    m = leaf_setproperty( m, 'diffusiontolerance', 0.000010 );
%    m = leaf_setproperty( m, 'allowsparse', true );
%    m = leaf_setproperty( m, 'maxIters', 3.000000 );
%    m = leaf_setproperty( m, 'maxsolvetime', 1000.000000 );
%    m = leaf_setproperty( m, 'cgiters', 0.000000 );
%    m = leaf_setproperty( m, 'simsteps', 0 );
%    m = leaf_setproperty( m, 'stepsperrender', 0 );
%    m = leaf_setproperty( m, 'growthEnabled', true );
%    m = leaf_setproperty( m, 'diffusionEnabled', true );
%    m = leaf_setproperty( m, 'flashmovie', false );
%    m = leaf_setproperty( m, 'makemovie', 0.000000 );
%    m = leaf_setproperty( m, 'moviefile',  );
%    m = leaf_setproperty( m, 'codec', 'None' );
%    m = leaf_setproperty( m, 'autonamemovie', true );
%    m = leaf_setproperty( m, 'overwritemovie', false );
%    m = leaf_setproperty( m, 'framesize', [] );
%    m = leaf_setproperty( m, 'mov', [] );
%    m = leaf_setproperty( m, 'boingNeeded', false );
%    m = leaf_setproperty( m, 'initialArea', 4.000000 );
%    m = leaf_setproperty( m, 'bendunitlength', 2.000000 );
%    m = leaf_setproperty( m, 'targetRelArea', 1.000000 );
%    m = leaf_setproperty( m, 'defaultinterp', 'min' );
%    m = leaf_setproperty( m, 'readonly', false );
%    m = leaf_setproperty( m, 'projectdir', 'D:\ab\Matlab stuff\Growth models' );
%    m = leaf_setproperty( m, 'modelname', 'GPT_DemoSubdivision_20121114' );
%    m = leaf_setproperty( m, 'allowsave', 1.000000 );
%    m = leaf_setproperty( m, 'addedToPath', true );
%    m = leaf_setproperty( m, 'bendsplit', 0.300000 );
%    m = leaf_setproperty( m, 'usepolfreezebc', false );
%    m = leaf_setproperty( m, 'dorsaltop', true );
%    m = leaf_setproperty( m, 'defaultazimuth', -45.000000 );
%    m = leaf_setproperty( m, 'defaultelevation', 33.750000 );
%    m = leaf_setproperty( m, 'defaultroll', 0.000000 );
%    m = leaf_setproperty( m, 'defaultViewParams', (unknown type struct) );
%    m = leaf_setproperty( m, 'comment',  );
%    m = leaf_setproperty( m, 'legendTemplate', '%T: %q\n%m' );
%    m = leaf_setproperty( m, 'bioAsplitcells', true );
%    m = leaf_setproperty( m, 'bioApullin', 0.142857 );
%    m = leaf_setproperty( m, 'bioAfakepull', 0.202073 );
%    m = leaf_setproperty( m, 'interactive', false );
%    m = leaf_setproperty( m, 'coderevision', 4351.000000 );
%    m = leaf_setproperty( m, 'coderevisiondate',  );
%    m = leaf_setproperty( m, 'modelrevision', 0.000000 );
%    m = leaf_setproperty( m, 'modelrevisiondate',  );
%    m = leaf_setproperty( m, 'savedrunname',  );
%    m = leaf_setproperty( m, 'savedrundesc',  );
%    m = leaf_setproperty( m, 'vxgrad', (108 values) );
%    m = leaf_setproperty( m, 'lengthscale', 2.000000 );
end