Ready Reference Manual

Summary of controls

Roll the mouse over any control and information about the control will pop-up.

Running models

To run a model from the GUI The normalling green Run panel turns red whilst the model is running.
A yellow Run panel means that the model is running on a version of the GFtbox that is older than the model itself (look at the interaction header to see our source code version control number for the copy of GFtbox that created the model).
An interaction function error (or any other error) will stop the model from running. It is then necessary to Reset using the Reset key - which will have turned red.

• Step, execute one step of dt. A whole lot of information pours out at the command console. Sometimes it takes a while to solve the equations. The process is monitored by a series of dots . . . . . . . Further information is provided below the Plotting panel, e.g. Step number, time per iteration, time per finite element, growth, etc.
• Run for, and enter the number of steps into the box
• Run until, and enter the model time to which you want to run
• Run to, and enter the multiple of the initial area you want to run to
• Stop, stops execution at the end of the current step.
• Call, makes a call to the interaction function but does NOT grow. This is useful for checking initial conditions - set patterns of morphogens. Having made a Call to the interaction function it is good practice to then Restart the model before running a model.

Outputs

Plotting panel

To view

• Specified values, i.e. kapar or a particular morphogen (factor) select from drop down menu top right and tick Plot current factor
• Output variables, e.g. growth rate, tick Plot output value and make selection from the two drop down menus.
• Plotting problems means that it is a good idea to tick/untick Monochrome control.
• thickness, tick/untick Menu:Plot:Thickness

To show/hide

• thickness, tick/untick Menu:Plot:Thickness
• mesh, tick/untick FE edges
• axes, tick/untick Menu:Plot:Show/Hide axes
  
• legend, tick/untick Menu:Plot:Show/Hide legend - also Set legend to choose heading
  

To set/modify values of morphogens (best done in the interaction function)

• Choose morphogen (list box), Click on Select Tool:Factors, '---' list box to select action and click on appropriate button (Add constant or Add radial, etc).
• at individual nodes (vertices). Choose morphogen (list box), Click on Select Tool:Factors, '---' list box to select action and click on node.
  

To clip the mesh (hide part of the mesh)

• Tick Clipping plane and choose the plane with Az (azimuth), ti (tilt), D
• Tick Clip and select the region to hide by using morphogen values (click on Mgens button)

Snapshots

Saved in png format in the project snapshots subdirectory

• Clicking Take snapshot makes a png file copy of the plotting screen. At the same time a copy of the interaction function (relabelled to have .txt as a suffix) is also made - to help document the snapshot.
• Publication quality screenshot is made by changing the action of the Snapshot button using Menu:Misc:Hi-res snapshots and choosing a number of dots per inch.

VRML, OBJ, FIG

To export the current mesh

• VRML, to interactively view the mesh using a web browser export the mesh as a VRML file, Menu:Mesh:Save VRML. We use such files to make 3D prints.
• FIG, for Matlab figure files.

Movies

By default movies are uncompressed and stored in the projects movies subdirectory

• To compress select Menu:Movie:Codec - we currently favour Motion JPEG avi
• To automatically convert the output to flash, .flv, select Menu:Movie:Convert to flash. This option requires the ffmpeg program to be on the current path.
• Click Record Movie to start creating a movie. The button will change to Stop Movie.

Useful programming constructs

The patterns of morphogens A and B are set up by

       id_a_p(m.nodes(:,1)<-0.03)=1; 
       id_b_p(m.nodes(:,2)<-0.01)=1; 

where id_a_p is the A morphogen. m.node(:,1) refers to the x coordinates of all nodes (vertices) in the mesh
The expression (m.nodes(:,1)<-0.03) means find all vertices with x coordinates that are less than -0.03.

Similarly, (m.nodes(:,2)<-0.01) means find all vertices with y coordinates that are less than -0.01.

And the pattern of polariser (P) is set up by

       P((m.nodes(:,1)<-0.05)&(m.nodes(:,2)>0.03))=1;

Where (m.nodes(:,1)<-0.05)&(m.nodes(:,2)>0.03) means find all vertices with x,y coordinates that are less than -0.05 and greater than 0.03 respectively

Thus the full code describing the model is:

   if (Steps(m)==0) && m.globalDynamicProps.doinit  % Initialisation code.
       id_a_p(m.nodes(:,1)<-0.03)=1; % setup region for A where identity factor A is represented by id_a_p
       id_b_p(m.nodes(:,2)<-0.01)=1; % setup region for B
   else
       % @@KRN Growth Regulatory Network
       kapar_p(:) = id_a_l .* inh(1,id_b_l); % growth rate
       kaper_p(:) = kapar_p; % isotropic growth
       kbpar_p(:) = kapar_p; % same on both sides of the sheet
       kbper_p(:) = kapar_p; % same
       knor_p(:)  = 0;       % thickness not growing
   end